Proflex 7521 Thermal Coated Impact-Resistant Gloves: En 388: 2131X, 10.5" Long, Medium (8), Gray, Pair - EGO17643

The ProFlex 7521 Thermal Coated Impact-Resistant Gloves deliver back-of-hand impact protection, thermal insulation and cut resistance for cold, tough jobs. A dual-layer knit shell pairs a warm 10-gauge brushed acrylic fleece liner with a durable 15-gauge polyester outer, while tri-hex TPR on the back of hand deflects blows and guards against pinch injuries. A full waterproof latex dip blocks out cold air and moisture, while a sandy nitrile palm coating adds abrasion resistance and a strong, flexible grip. Among the strongest coatings available, the sandy nitrile dip boosts glove durability while remaining comfortably flexible for enhanced dexterity and minimal hand fatigue. Built for impact-heavy work, these gloves meet ANSI/ISEA 138-2019 Level 1 standards with durable TPR on the back in a tri-hex design that deflects blows and guards against pinch injuries. The unique pattern boosts durability while maintaining the flexibility and dexterity needed for precision work. The 15-gauge polyester knit is tested to ANSI/ISEA 105-2016 level A2 cut protection and level 4 abrasion resistance for safety around sharp or rough materials. Classified by the weight needed to cut through, ANSI/ISEA 105-2016 level A2 is considered a relatively low-cut rating with a measure of 500-999 grams. For more on cut-resistance levels, check out our ANSI/ISEA 2016-105 Guide. Gauge indicates the number of stitching rows per inch—a higher gauge will have more flexibility and less bulk. When selecting safety work gloves, workers should look for the best possible balance of dexterity and protection for their job. Touchscreen-capable fingertips make it easy for workers to swipe, tap and type on smartphones and tablets without having to remove their work gloves. These waterproof work gloves meet the EN 388: 2131X standard. They are ideal for work in cold wet environments, including material handling and construction.

Product Features

• Tri-Hex TPR across knuckles and fingers for pinch injury prevention and blow deflection in harsh environments; meets ANSI/ISEA 138-2019 level 1 standard for impact protection.
• ANSI/ISEA 105-2016 A2 cut protection and Level 4 abrasion resistance for protection when working with sharp materials.
• 15 g polyester with a soft 10 g brushed acrylic fleece liner for comfort and warmth.
• Sandy, nitrile-dipped palm for secure gripping on wet, oily and dry surfaces.
• Fully coated latex protects hands from water and cold air.
• Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.
• Easily swipe, tap and type on smartphones and tablets without removing gloves.
• Machine wash, air dry.

Item Dimensions
Weight: 0.36 lbs.
Height: 2.6 in
Depth: 4.6 in
Width: 4.1 in

Prop 65 Warning
WARNING: Cancer and Reproductive Harm -- www.P65Warnings.ca.gov